Multi-Switch 16 Decoder for Futaba F-Series Transmitters (Not FX)

£69.99

One decoder is required per multi-switch module on the receiver side. A decoder needs one servo channel only and controls 16 switching channels. With memory function – both channels on a control switch can be switched on at the same time. The memory function can be switched off. The short circuit protected, reverse polarity protected and over temperature protected output stage makes this decoder almost indestructible. Up to three decoders can be used on an F14.

SKU: P-MSD8369 Category: Tag:

Description

 

One decoder is required per multi-switch module on the receiver side. A decoder needs one servo channel only and controls 16 switching channels. With memory function – both channels on a control switch can be switched on at the same time. The memory function can be switched off. The short circuit protected, reverse polarity protected and over temperature protected output stage makes this decoder almost indestructible. Up to three decoders can be used on an F14.

• Short circuit protected
• Reverse polarity protected
• High output currents switchable
• Selectable memory function

Set Contents:
• Multi-Switch 16 Decoder
• User Manual

Recommended Accessories:
• P-CBF14N
• P-CBF14NB
• P-MSM8084

Specifications
Switch Functions16
Weight30g
Max Current1.8V Per Output
Dimensions62 x 32 x 24mm
VoltageBatt = 4.8-24V & Rx = 4.8-6V
No Load Current50 mA

Reviews

There are no reviews yet.

Be the first to review “Multi-Switch 16 Decoder for Futaba F-Series Transmitters (Not FX)”

Your e-mail address will not be published. Required fields are marked *

You may also like…