The micro Failsafe is a must in any RC model to protect the model from damage should you lose the signal from your transmitter due to low transmitter batteries or going out of transmitter range. The micro Failsafe also protects the model from a flat receiver battery.
The micro Failsafe can be programmed to activate at a selectable reciever battery low voltage and can also be programmed to tell the servos to go to a certain position should the failsafe activate.
LEDs are used to tell you if signal and battery are good or bad!
Set up.Digital 1-touch
Battery Type.NiCAD/NiMH/Lead Acid/LiPo
Dimensions.L25.0mm x W15.0mm x H6.0mm