Joysway Mad Flow V3 F1 Radio Control RC Brushless Boat ARTR (W/O LiPo & Balance charger)

Description

The Joysway RTR Mad Flow is styled after a tunnel-hull F1 Boat. With a top speed of 55 km/h+ and intelligent hull design, this durable speed boat will automatically flip right side up and drain the water from the rear of the hull if you roll during high speed racing. Complete with a powerful water cooled D2842 Outrunner brushless motor, 30A water cooled brushless ESC, 9g rudder servo and 2.4Ghz transmitter the Mad Flow is sure to be hit at your favorite patch of water.

The Mad Shark brushless ARTR is supplied with all the electronics pre-installed for you. Power comes from a water-cooled outrunner brushless motor and water-cooled brushless ESC (electronic speed controller) giving you a stunning top speed of 55+ kph!

To get going all you need is a 11.1v 2200MAH LIPO battery, suitable charger and  4 x ‘AA’ batteries for the transmitter. These batteries & a selection of suitable chargers can be found on our website from the links below:

2200mAh 3S 11.1v 35C Li-Po

https://howesmodels.co.uk/product-category/batteries-chargers/li-po-batteries-and-chargers/li-po-battery-chargers/

10 x JCB Super Alkaline AA Battery 1.5V

Specifications

• Hull Material: ABS Plastic
• Length: 590mm
• Beam: 230mm
• Servos: 1 x 9g (included)
• Radio System: 2 Channel 2.4GHz (Included)
• Electric Motor: D2842 Outrunner Brushless (Included)
• ESC: 30A Water Cooled Brushless w/BEC (Included)
• Plastic stand
  Not recommended for use in salt water. Care must be taken to ensure all parts are dry and clean after use.

REQUIREMENTS

• A11.1v 2200mAh 35C LiPo pack (Not included)
• Lipo balance charger and adapter (Not included)
• 4 x AA Alkaline batteries for transmitter (Not included)