Description
FTX Stinger 1:10 On-Road Street Drift Car Brushless RTR Radio Control Car – EX Display
This is a EX-Display model which has never been used or never removed from the carboard packaging securing the base of the car to the box. So model never used but if you look at the photos there is a couple of small marks on the top of the shell. Because of these marks we are including a upgraded 7.4v 4000MAH Li-PO battery instead of the 2500MAH battery supplied.
Everything you can see in the photos is included including the instructions. However this model does not include the extra set of hard slick drift tyres (Part Number FTX10572 RRP £9.50)
Below is the information of the kit when new.
FTX STINGER 1:10 ON-ROAD STREET BRUSHLESS RTR CAR – RED
Sideways drift meets straight-line speed runs with the Stinger from FTX. With hard drift boots included alongside sticky soft treaded rubber tyres, you can literally decide on the fly how and where you want to run your Stinger.
With a wide aero inspired wide moulded main chassis featuring no screw head, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 15kg Etronix metal geared steering servo and Hobbywing brushless 60A esc and 3300KV motor, powered by a Voltz 2S 2500mAH Lipo battery.
Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.
The Stinger is topped off with a moody muscle car body that features moulded front grill and light buckets front and rear housing a multifunction LED light set.
Hit the throttle and burn rubber with the FTX Stinger!
Features
- 99% Ready-to-run
- FTX 2.4ghz 5ch Radio System
- Etronix 3652 KV3300 Brushless Motor
- Hobbywing 60A Brushless Speed Control
- Etronix Waterproof 15kg MG Steering Servo
- Voltz 2S 30C 2500mAH LiPo Battery (we are upgrading this battery to a 7.4V 4000MAH LiPo battery)
- Etronix LiPo Balance Charger
- Gyro Stability Control Option
- Multifunction LED Light Box Control
- Scale finished body with moulded accessories
- Front and Rear Anti-Roll Bars Included (assembly required)
- Rubber Street & Hard Slick Drift tyre sets included
- Front and Rear Metal Gear Sealed Differentials
- Shaft driven 4WD
- Front CVD Universal Driveshafts
- Ball Bearings
- Adjustable Oil Filled Shock Absorbers
- Rear Moulded Diffuser Bumper
- Moulded wide main chassis featuring screwless base
- Quick Release Battery Holder
Specifications
Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm
Required to complete