Welcome to our new website! We have only just gone live so there may be some teething problems! If you are having difficulty ordering please call us on 01865 848000. We hope you enjoy our new site.

Sale!

Aeronaut Queen Sports Boat circa 1960s AN3080/00

£182.10 £175.00

Queen is a semi-scale wooden boat from the 1960?s. During this period sports boats were still built from durable mahogany timber – as is our Queen.

We have again adopted the proven hull design of our two models Classic Sportboat and Diva, but with increased size and a new superstructure. The side panels of this model?s superstructure are glued permanently to the hull in order to provide effective protection from spray. Access to the interior is gained by raising the cabin roof and lifting out the cockpit as a complete shell from the rear part of the hull.

This model is an all-wood kit based on a hard-chine hull, which is a basic requirement for fast, straightforward building. All the wooden parts are highly pre-fabricated, and are ready to be glued in place after a quick check for fit. The basic method of assembly is the same as that of the Classic Sportboat and Diva: the hull is built over a die-cut Depron sheet jig into which the bulkheads are inserted. Fitting the keel and the two fore-and-aft bearers completes the basic bulkhead framework.

The ideal power plants for the model are the Race / Speed 600 – 700 series of electric motors.

The model kit contains all the wooden parts required to build the model, together with fittings and propeller shaft

Specifications:
Length 950mm
Width 315mm
Part No: AN3080/00

Description

Queen is a semi-scale wooden boat from the 1960?s. During this period sports boats were still built from durable mahogany timber – as is our Queen.

We have again adopted the proven hull design of our two models Classic Sportboat and Diva, but with increased size and a new superstructure. The side panels of this model?s superstructure are glued permanently to the hull in order to provide effective protection from spray. Access to the interior is gained by raising the cabin roof and lifting out the cockpit as a complete shell from the rear part of the hull.

This model is an all-wood kit based on a hard-chine hull, which is a basic requirement for fast, straightforward building. All the wooden parts are highly pre-fabricated, and are ready to be glued in place after a quick check for fit. The basic method of assembly is the same as that of the Classic Sportboat and Diva: the hull is built over a die-cut Depron sheet jig into which the bulkheads are inserted. Fitting the keel and the two fore-and-aft bearers completes the basic bulkhead framework.

The ideal power plants for the model are the Race / Speed 600 – 700 series of electric motors.

The model kit contains all the wooden parts required to build the model, together with fittings and propeller shaft

Specifications:
Length 950mm
Width 315mm
Part No: AN3080/00

Reviews

There are no reviews yet.

Be the first to review “Aeronaut Queen Sports Boat circa 1960s AN3080/00”

Your email address will not be published. Required fields are marked *