The Overlander TS-80 AC/DC 10A 80W Touch Screen Charger has an optimised operating system that allows you to easily set up and monitor the charging/discharging process via the touch screen. It has a high-power and high-performance circuit, with a maximum output of 80W, a maximum charge current of 10A and a maximum discharge current of 2A. This charger can be used with a wide range of batteries with different chemistries.
This charger features:
► Balance mode for Lithium battery packs: you do not require an additional balancer to balance the voltage when charging a Lithium (LiPo/LiFe/LiIon) pack.
► Individual cell monitoring: the charger monitors and balances each cell individually during the charging/discharging process.
► ‘Fast’ and ‘Storage’ modes for Lithium packs: the ‘Fast’ mode reduces charging time, and the ‘Storage’ mode control the nominal voltage of the battery to make it suitable for long-term storage.
► Cyclic charging/discharging for NiMH/NiCd packs: allows you to perform 1-4 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
► Safety features: including delta-peak sensitivity, capacity limit, charge time limit. input current check and an automatic cooling fan.
|Operating Voltage Range||AC 100-240V||DC 10-18V|
|Charge Power||max 80W|
|Discharge Power||max 10W|
|Charge Current Range||0.1-10A|
|For Programmable Power Supply||10A 80W|
|Discharge Current Range||0.1-2A|
|Current Drain for Balancing LiPo||200mAh/cell|
|NiCd/NiMH Battery Cell Count||1-15 cells|
|Lithium Battery Cell Count||1-6 cells|
|PB Battery Voltage||2-20V|